Instructions for True Bypass Modification to Vox "Reissue" V847 Chrometop
1) Unsolder wires to SPDT (stock switch), remove it, and Install new DPDT.2) Cut Brown wire at "X" Mark where it meets PCB Quick Disconnect.
3) Re-route that Brown wire to DPDT Terminal #4 do not solder 4) Jumper a short wire from DPDT terminal #4 to DPDT terminal 3 and solder both. 5) Attach wire from Output Jack "Tip" to DPDT Terminal #5 and solder. 6) Run the Green wire (from PCB disconnect) to DPDT Terminal #2 and solder. 7) Attach wire from Wah Pot Terminal #3 to DPDT Terminal #6 and solder. 8) Attach a (ground) wire from wah pot terminal #1 to DPDT Terminal #1 and solder.Congratulations....you're done! Vox is a registered trademark of Vox Amplification and has no affiliation with Fulltone Musical Products Inc.